Stihl FS40C String Trimmer First Use and Review

DougI recently wrote about my adventure in trimmer shopping, this is the follow-up to that piece as a review of my new Stihl FS40C string trimmer.

Stumbling Start

Testing was delayed by the fact that I didn’t have a 1 gallon gas can.  I have several 2 gallon cans, and one is a can into which I pump precisely 2 gallons of gas for use in my 2-stroke equipment.  I have some gas/oil mixed up but that’s a 40:1 mix for my older tools.  The Stihl FS40C string trimmer, uses a 50:1 mix.

I bought a 6-pack of synthetic oil for the Stihl, each bottle mixes with one gallon of gasoline.  I figured I’d use that can of new gas and two bottles of oil and be all set to fire up and see what it can do.  But the manual, and some commentary on-line, talk about the need to use the gas/oil mix within 30 days or it begins to decompose and using degraded gas/oil can void the extended warranty (4 years) Stihl offers.  In fact, in reading the warranty there are several ways they try to get out of paying for repairs during that second two year period.

So I popped down to the closest hardware store and bought a 1 gallon gas can, mixed in the Stihl oil and filled the trimmer’s gas tank.

Firing Up My Stihl FS40C String Trimmer

Stihl String Trimmer
Stihl FS40C

The controls and start-up procedure are standard and familiar.  This does have a convenient feature that opens the choke automatically if I gun the engine a little after start-up.

I pushed the primer bulb 5 times and the trimmer started up on the third pull.  It would probably have started on the first or second had I primed it more: the first two presses on the bulb passed nothing but air – being brand new and never run.

One of the issues I’ve had with my old trimmer was keeping it running while at idle.  It tended to die if I didn’t gun the throttle a little while walking from one spot to the next.  If I had to set it down to open a gate it was sure to quit on me; but it started up again, so it was no big deal.

As you can see, I could set this one down and leave it for a long time and it continues to purr right along.

Gas Mileage

One of the few complaints I saw in reviews on the Stihl FS40C string trimmer was that it has a small fuel tank and requires frequent fill-ups.  But I found this not to be the case.  Maybe it was an old review and the issue has been addressed since, or maybe the reviewer expects to trim for 3 hours solid.  I trimmed my workshop yard (small but steep) and the dog’s play yard (1/3 acre) and still has some fuel left in the tank.  That’s plenty of “mileage” for me in one session.

Power and Performance

stihl fs40C string trimmer
Even tall woody weeds are gone

At 27cc this engine is a bit smaller than the 31cc in my Poulon, but the Stihl FS40C string trimmer had no trouble powering through grass and standing weeds.  The .80 line it uses punched through the small brushy stuff better than the .65 line on my Poulon.  The bump feed on the line is not as touchy as the old one had gotten to be either.  I tended to use up line faster than I should because accidental bumps against the ground would feed line that just got cut off by the blade.  Not a problem with the new Stihl.

As I was working, I did notice that the engine went “flat” a few times.  Each time I told myself, “Okay, here we are running out of gas already.” but then it picked up power and keep going.  I’m not sure what that was about.

The throttle is responsive,  the engine not too loud, and the unit is lighter in weight than my old one.  This is largely because of the shaft design I chose.

Which Shaft?

You have three choices to make in trimmer shafts: straight shaft or curved shaft, long shaft or short, split shaft or solid.

Straight shafts use a mechanical gearbox on the end of the shaft to change the direction of power and channel it into the cutter head.  Curved shafts use a flexible cable inside a housing to transmit power to the cutting head.

A straight shaft offers a lower cutting head, thereby being better at getting underneath fence rails, sheds, shrubbery, and so forth. The gear box makes the end of the shaft heavier, but is said to be more efficient in transmitting power to the cutting head.  Just make sure you check the oil in the gear box occasionally.

The curved shaft eliminates that cast metal housing and gears, thereby making the shaft lighter.  The trade-off is that the cable running through a curved shaft can create friction, and some folks complain about frequent failure of these cables.  Mostly in low end brands though: I’d expect Stihl to use a properly sealed and lubricated cable and housing.  I saw no complaints about this in product reviews.

Both styles come in a long-shaft and a short-shaft version.  If you need a long reach (like reaching over a brow to cut a steep embankment) a long shaft is handy.  For tight quarters the short shaft is great.

Both styles also offer a split-shaft version that allows you to change out the implement on the end of the shaft: string trimmer, brush cutter, pole saw, leaf blower, edger, and cultivator are some of the attachments available for some of these systems.

I had the cultivator (tiller) and the brush cutter blade for my Poulon, but rarely used them.  I decided to forgo the split-shaft this time around.  I also bought a curved shaft for the first time, and a short shaft at that.

Tall, woody packing grass – Before

I noticed the difference right off.  Not having the long shaft with gear box cantilevered out on the end of it made the trimmer much easier to handle.  It felt weird having the cutter so close to my feet though.  I will definitely miss that long shaft when weed-whacking up in Copperhead County.  That extra few feet of exploratory distance was comforting.

After

But working around my walkways and lumber piles was much easier because I wasn’t doing so much jockeying to move through the tight spaces and get into the corners.

In order to get the cutter head parallel to the ground I still had to hike the engine up my side, but that’s because I’m short.  The short shaft did help a bit though, the hot engine did not have to be tucked up into my arm pit.

Stihl FS40C String Trimmer Conclusion

I’ve only used it once so far, but that was a good experience: it started right up, ran strong, had plenty of power and work time.  I’ll modify this article as I gain experience with my Stihl FS40C string trimmer.

More Info: Listing on Stihl web site

 

Leave a Reply

Your email address will not be published. Required fields are marked *